Here is a detailed tutorial to guide you: How to set up BMW ICOM on BMW ISTA Rheingold software? It’s useful when you first use ISTA with ICOM!
Suitable ICOM interface: BMW ICOM A2 WIFI
Recommended ISTA software: 03.2017 BMW ISTA 4.04.12
BMW ISTA Rheingold ICOM set up steps
Step 1: Open “Local Area Connection” Properties→ “Internet Protocol Version 4 (TCP/IPv4)” Properties.
Enter IP address: 169.254.1.1
Enter Subnet mask: 255.255.0.0
Step 2: If VMware is installed, open Virtual Network Editor from the host any adapters with Subnet address: 169.254.0.0
Open C:/EDIABAS/BIN/EDIABAS/INI with Notepad and check “Port=6801” in TCP setting.
Connect car with ICOM to PC.
Step 3: Now run ISTA using shortcut in start menu, wait it boot and click the Setting button.
Select “VCI Config” tab and “HO-ICOM/ENET and ISIS network” then click “OK”.
Step 4: Go to “Operations” on top bar, click “Read out vehicle data” then “Complete identification”.
Then select your ICOM from the list and click “Set up connection”. Things done!
OBD2France.com all rights reserved, Original Article url:How to set up BMW ICOM on ISTA Rheingold step by step?